STEWART ERGONOMICS IS PROUD TO ANNOUNCE

IT'S A DIGITAL SLAM DUNK®

Outstanding Features:
		Pressure Decay and Leak Rate Plus Optional Vacuum Testing	Click to download our: • SlamDunk Brochure • SlamDunk Reduced Instruction Set (RIS) Brochure • SlamDunk Reduced Instruction Set (RIS) Manual • SlamDunk Pricelist
		Simple Set-Up
		High Performance
		Easy to Operate
		Wide Selection of Ranges
		Fast Test Cycles
		80 Program Storage
		RS-232 Communications
		Optional Ethernet Connection to a LAN Using TCP/IP or UDP/IP Communications
		Optional RS-422 and RS-485 Serial Communications
CALL US FOR OTHER SLAM DUNK COMMUNICATIONS REQUIREMENTS.

Make Your Pressure Testing a SLAM DUNK®

The Clean, Dry Leak Tester

SLAM DUNK® is a high performance control, which is easy to master in minutes. Set up consists of following the prompts on the 80-character display and entering simple parameters by pressing the four control buttons. These buttons are password protected to prevent unauthorized changes. Test programs can be linked to run sequentially for parts requiring multiple tests. The test is started by manually or remotely activating the start button. A typical test consists of fill, snapshot, compare and depressurize cycles. A bright red or green LED indicates results of the completed test with +24 sourcing output provided for PLC. Typically, a 7 micron leak in a 15 cu. in. test part can be passed or failed in 5 seconds @ 10 p.s.i., and in a 125 cu. in. test part in 15 seconds at 10 p.s.i. 2 sccm leaks are typically found at 100 p.s.i. in less than 15 seconds at a volume of .6 liters. Vacuum testing down to -14.7 p.s.i. can simplify fixturing of molded parts and is necessary for components of vacuum systems.

SLAM DUNK® SPECIFICATIONS

• 24 bit A to D Converter senses pressure or vacuum to .00001 p.s.i resolution.
• Test Time: 1 to 250 seconds, 1 minute to 250 minutes
• Test Differential Detection: .0001 to 25 p.s.i. Pressure Decay Test Leak Rate from .035 sccm at .05 p.s.i. to 5.0 sccm at 250 p.s.i.
• Dwell Time: 0 to 120 seconds
• Select pretest pressurization or pressurize at start of test.
• Snapshot (settle time before sensing): 0 to 25 seconds in .1 sec increments.
• Slam test runs concurrently with regular test, reduces good test time 40-60%
• Depressurize duration time: 0 to 99 seconds insures depressurization of large parts.
• Low air time: .2 to 50 seconds. (Fill Time)
• Test program capacity: 80 test programs.
• Number of test programs links for sequential testing: Up to 80.
• Auxiliary output signals end of good sequential test.
• With RS232 communication, a computer or PLC can control test functions.
• Programmable upper limit for rising pressure during test.
• 5-digit password protection for changing test programs and parameters.
• Test program parameters and p.s.i. sense output displays on 4x20 character display.
• User friendly control panel to select, add, change test programs.
• Operator only has to press large start switch to commence testing.
• Large bright GOOD and BAD L.E.D.s indicate results of test.
• Includes remote start input, remote good, bad and test running and E-stop +24V source outputs for automatic testing.
• AC input power: 120VAC 50/60Hz, fused at 1/2 A.
• Tester dimensions: 3"H X 19-1/4"W X 4-1/4"D
• Tester material: Anodized aluminum, NEMA 12 Enclosure
• Dual valve assembly supplied with pressure only units.
• Triple valve assembly supplied with pressure/vacuum units.
• Optional precision electronics air pressure regulator automatically sets up selected air pressure.
• 1 year warranty.
• Calibration traceable to NIST.
  
  
  
  
  

  SLAM DUNK® Video Demonstration We have provided the videos for use with either Real Player or Windows Media Player and in both streaming and downloadable formats. If you would like to view a video online "on the fly" without downloading the file first, choose the streaming format. Please Note: To view streaming files, a 256Mb high-speed internet connection (e.g. Cable, DSL) is required. Dialup users: we recommend downloading the files (note: these are large files and downloading will take some time). To download the files, right-click the Download link and choose "Save Target As..." in Microsoft Internet Explorer (or a similar function if you use another browser). We have provided links below for downloading free video player software if needed.
  	Real Player		Windows Media Player
  Full Length Video:
  SLAM DUNK® Demonstration	Stream	Download ~ 36.0 MB	Stream	Download ~ 44.0 MB
  By Segment:
  1. Introduction	Stream	Download ~ 6.9 MB	Stream	Download ~ 7.2 MB
  2. Slam Test	Stream	Download ~ 1.8 MB	Stream	Download ~ 2.1 MB
  3. Small Part Test Setup	Stream	Download ~ 1.5 MB	Stream	Download ~ 2.2 MB
  4. Large Part Test Setup	Stream	Download ~ 0.7 MB	Stream	Download ~ 0.9 MB
  5. Large Part Test	Stream	Download ~ 4.4 MB	Stream	Download ~ 4.9 MB
  6. Introducing a Known Leak	Stream	Download ~ 3.2 MB	Stream	Download ~ 3.5 MB
  7. Retesting the Good Part	Stream	Download ~ 2.6 MB	Stream	Download ~ 3.1 MB
  8. Start, Good, and Bad Lights	Stream	Download ~ 1.5 MB	Stream	Download ~ 2.3 MB
  9. Set / Unset Password	Stream	Download ~ 5.0 MB	Stream	Download ~ 5.8 MB
  10. Multiple Test Sequences	Stream	Download ~ 7.4 MB	Stream	Download ~ 7.7 MB
  11. Options	Stream	Download ~ 4.6 MB	Stream	Download ~ 5.6 MB

  
  

  Download Real Player

  Download Windows Media Player